One, how to clean the inner pot of the water dispenser
1、 Disconnect the power cord, remove the bucket, and open the drain port located behind the water dispenser. This port typically has a white plastic knob. Drain any remaining water. Then, turn on both the hot and cold water switches to flush the system.
2. Remove the "Smart Seat", which is the part of the water dispenser that contacts the water tank. Thoroughly clean the inside and outside of the water dispenser's body and lid with alcohol wipes, preparing for the next step of disinfection.
3. Prepare the disinfectant solution according to the instructions on the cleaning tablets or disinfectant packaging. Cleaning tablets and specialized disinfectants are readily available in supermarkets and are relatively inexpensive. Add the disinfectant solution to the water dispenser, filling the entire cavity. Allow it to stand for 10-15 minutes.
4. Open all valves of the water dispenser, including the drain valve and water dispensing valve, and flush with disinfectant.
5. Thoroughly flush the entire water tank of the water purifier with clean water. It is recommended to move the water purifier to the bathroom to ensure sufficient water supply and open all switches to completely flush and rinse the tank.
Two. How often should the inner pot of the water dispenser be cleaned?
A bottled water dispenser's hot and cold water tanks, if not cleaned regularly (at least once every month), can accumulate large amounts of bacteria, viruses, sediment, heavy metals, and even red algae, posing a threat to human health. According to maintenance personnel recommendations, it is advisable to clean the dispenser once every month, especially during the summer months.