3" Fmc Chiksan Coiled Tubing Swivel Joints Repair Kits Rubber Sealing Kits

FMC Chiksan Packing Kit for Swivel Joints

FMC swivel joint packing kits Seal Ring for Repair Kit includes SJP seals ,ball plug ,rubber wiper seals , metal balls and o rings

Swivel Joint Seal is the composite seal which consist of rubber ring and resin ring for a hydraulic turning unit like a swivel joint of hydraulic excavator. The optimum design with the rubber ring and the resin ring can achieve the good sealing performance.

Buna/Brass swivel packing seals, we can also produce the packing seal kit for you.
HNBR/Brass 

1). MODEL APPLIED: Replacement part swivel joint seal kit for Fig1002, 1502. 
2). MATERIAL PROPERTIES: Resistance to Friction and Wear, Weather Resistance, Oil Resistance, Non-toxic, Safety and Long-Time Uses, High and Low Pressure Resistance. 
3). SATISFACTION WARRANTY: We offer repair service or exchange service for free. 

1502/1002/602 Swivel Joint packing seals for Pressure manifold

Size :

2" ,3"narrow and wide;1502 4inch and 1002inch swivel packing 

Material :

Seal parts NBR,FKM /FPM,HNBR/HSN ;

Back up ring Brass or stainess steel 

2" BUNA/BRASS SWIVEL JOINT PACKING

2" OVERSIZED BUNA/BRASS SWIVEL JOINT PACKING

2" SWIVEL JOINT REPAIR KIT

3" BUNA/BRASS SWIVEL JOINT PACKING

3" SWIVEL JOINT REPAIR KIT

MaterialBuna ,NBR, HSN ,HNBR,FKM,FPM,Flourelastomer  Color Black  Fig 1002,1502 Weco FMC Chiksa Swivel Joint Size 2inch ,3inch,4inch  Pressure 11250-15000psi cold working pressure 

Product Parameters

2" Swivel Packing repair kit     QTY 2" Packing 1 2" Dust Seal 2 2" O-Ring      1 2" 3/8" Ball Plug    3 3" Swivel Packing repair kit    3" Wide SJ Packing     1 3" Narrow SJ Packing  1 3" Dust Seal        2 3" Narrow O-Ring   1 3" Wide O-Ring     1 3" Ball Plug        3 4" Fig1002 Swivel Packing repair kit    4" Fig 1002 Packing   1 4" Fig 1002 Dust Seal  2 4" Fig 1002 O-Ring     1 4" Fig 1002 Ball Plug    3 4" Fig1502 Swivel Packing repair kit    4" Fig 1502 Packing     1 4" Fig 1502 Dust Seal  2 4" Fig 1502 O-Ring    1 4" Fig 1502 Ball Plug   3

Color 

Material 

Black 

NBR/FKM/HNBR with Brass or Stainless Steel 

Blue 

FKM with Stainless Steel 

Yellow 

Fkm With Stainless steel 

White 

PTFE 

Note 

Material and color descriptions are only for seals shown in the picture on the left

Hammer union seals are used in the connections between flexible hoses or pipes used in the oil drilling industry. The seal provides a critical fluid tight connection within the union hardware. Hammer unions consist of a thread end, a nut end, and a hammer nut that when tightened seal the assembly with the assistance of an elastomeric seal. The seal is lipped to prevent it from falling out when inverted. Some profiles such as Fig 2202, Fig 1004, Fig 1502, Fig 2002, Fig 602, Fig 1002 etc require a Hammer Union Lip Seal or an 'O'Ring depending on the Size of the Hammer Union. We produce 2",3", and 4" Hammer Union Seals in Nitrile for standard service and in  FKM or HNBR for Sour Gas Service. In addition to the standard molded rubber seals, we offer these with either a brass or stainless steel anti-extrusion ring. Also available in PTFE,PU

Size Chart of hammer union seals 

Size

2"

3"

4"

Material 

Hammer Union Seals in Nitrile for standard service and in FKM or HNBR for Sour Gas Service. In addition to the standard molded
rubber seals, we offer these with either a brass or stainless steel anti-extrusion ring. Also available in PTFE,PU

Pressure 

6000psi to 15000psi

Hardness 

75Shore A to 95 Shore A