| Model NO. | MPP |
| Usage | Wire and Cable Pipe |
| Pipe Length | 6m/Customizable |
| Tensile Strength | 30~40MPa |
| Connection | Butt Fusion, Electrofusion, Socket Fusion |
| Water Absorption | Less Than 0.01% |
| Contraction Percentage | Less Than 0.4% |
| Standard | Dl/T 802.7-2023 |
| Life Span | Over 50 Years |
| Transport Package | Standard Export Packing |
| Specification | IN100mm-IN355mm |
| Trademark | OUYA PIPE |
| Origin | China |
| HS Code | 3917210000 |
| Production Capacity | 50, 000t/Year |
Product Introduction
Mpp Plastic Tube for Electrical Cable Use
Polypropylene-based and processed with special materials, MPP pipes offer several advantages such as high strength, good thermostability, and low installation cost. They are widely used as protective conduits for telecommunication cables and support the development of modern cities.
Typically, the pipe burial depth ranges from 2 to 18 meters. Trenchless construction is economical and effectively protects cables while improving the living environment, as it is environmentally friendly and causes minimal disturbance to the surrounding soil.
Way of Connection:
Use hot-melt welding machines to connect the pipes at a temperature of 200°C. (Since MPP pipes are connected using hot-melt welding, and damaged connectors may harm cables, MPP electric pipes should be produced using new (virgin) materials.)
Application Details:
Throwing, striking, engraving, and excessive exposure to sunlight are strictly prohibited.Pipe centers should be properly aligned, and cuts must be made vertically.The construction temperature, time, and pressure should be adjusted according to the surrounding environment.The minimum bending radius should be greater than 75% of the pipe's outer diameter.
(mm)
Normal temperature
