16mm Flat Emitter Drip Irrigation Tape for Agricultural Systems with 1.38L/H Flow & 50cm Spacing

Brand

APEX

Specification

12mm,16mm

Packing

500-1000m/roll

Dripper spacing

200mm-500mm

Pressure

0.6-4bar

Flux

1.8-2.0-3.0L/H

OEM service

We're factory ,OEM service iswelcome

Product Introduction

Polyethylene (PE) irrigation pipes are a cornerstone of modern agricultural, landscape, and golf course irrigation systems. They have largely replaced traditional materials like PVC, steel, and concrete due to their exceptional flexibility, durability, and cost-effectiveness. PE pipe is a thermoplastic polymer made from the polymerization of ethylene gas, and for irrigation purposes, it is specifically engineered to withstand harsh environmental conditions, pressure fluctuations, and long-term exposure to sunlight and chemicals.

These pipes are manufactured in various types, primarily categorized by their density:

MDPE (Medium-Density Polyethylene): Offers a good balance of stiffness, strength, and stress-cracking resistance. It is a common, all-purpose choice for many mid-pressure irrigation applications.
HDPE (High-Density Polyethylene): Characterized by a higher strength-to-density ratio, excellent rigidity, and superior chemical and abrasion resistance. HDPE is the preferred material for mainline and sub-mainline applications where higher pressure ratings are required.

Product advantages

A critical advancement in PE irrigation pipes is the use of PE100-RC material. The "RC" stands for "Resistant to Crack," signifying a next-generation polyethylene with extremely high resistance to slow crack growth (SCG) and rapid crack propagation (RCP). This makes it incredibly robust against point loads, rock impingement, and installation stresses.

PE irrigation pipes are typically black, often with co-extruded color stripes (blue for potable water, other colors for specific applications) to indicate their purpose and pressure rating. The black color is due to a high concentration of carbon black (2-3%), which provides crucial protection against ultraviolet (UV) radiation, preventing degradation from sun exposure.

They are designed to be connected using heat fusion techniques (butt fusion or electrofusion) or mechanical fittings. Fusion welding creates a seamless, monolithic joint that is as strong as the pipe itself, completely eliminating the risk of leaks at connection points—a significant advantage over threaded or glued joints.

The adoption of PE irrigation pipes is driven by superior technical and economic benefits that enhance water delivery efficiency and reliability.

1. Exceptional Durability & Flexibility: PE pipes are highly resistant to impact, abrasion, chemicals, and environmental stress cracking, ensuring a long service life. Their flexibility allows for coiled installation in long lengths, reducing joints and minimizing leak risks. This also simplifies trenching and lowers installation costs.

2. Superior Hydraulics & Corrosion Resistance: The smooth inner surface minimizes pressure loss and maintains high flow efficiency, reducing energy costs. Unlike metal pipes, PE is fully immune to corrosion and rust, protecting water quality and ensuring consistent performance over time.

3. Leak-Free & Frost Tolerant: Heat-fused joints create a seamless, leak-proof system, crucial for water conservation. PE material can expand under freeze conditions, significantly reducing the risk of bursting compared to rigid pipes.

4. Low Maintenance & Cost-Effective: Reduced installation time and minimal long-term maintenance lead to a lower total cost of ownership. PE systems offer reliable, uninterrupted service with no need for scheduled repairs.

Product Display

Jinan Apex lmport and Export Trading Co., Ltd is engaged in manufacturing, supplying and exporting an unparalleled range of PEX pipes, PB pipes, EVOH PEX/PERT/PB oxygen barrier pipe, PPR pipes, HDPE pipes, PVc pipes and the corresponding pipe fittings.

APEX was founded in 2005.We has been developing into a market leader in both the production and export of quality plumbing solutions in Asia. Within our manufacturing plant, we have implemented a quality management system which ensures zero defects. Our extremely strict quality control system is performed so that the entire production process, from the supply of raw materials to the delivery of finished products, is completely monitored. The test results are all recorded and fuly compliant with 1SO9001 standard. With the support of strong technical expertise and modern business management systems, the company has been awarded a vast aray of worldwide industry-recognized certifications, such as American NSF, UPC certification, American, Canadian certification, British WRAS, INTERTEK certification, Australia WATERMARK, StandardsMark certification, French ACS, BV certification, Swiss SGS certification, German KYW, TÙ V certification, . the European Union' S CE, ROHS, REACH certi.fication, etc.

APEX use only the finest raw materials which are imported from the top international suppliers. This ensures the quality of plastic pipes from the onset. Our raw material suppliers are well-known companies, including Mitsui Chemicals, Kuraray,CONSTAB, Dow, Hyundai, Hyosung, LG, SK, etc.

At APEX, our production capacity reaches 35000 tons of plastic products each year. All our production lines have been outfitted with the most advanced high-speed pipe extrusion machines. The entire production line is controlled by a Barton PLC system. lt comes with a high-precision, lost-in-weight feed system.Iin addition, the production lines are all equipped with cutting-edge test facilities. This ensures we can produce high-quality pipes efficiently.

If you require a reliable, high-efficiency and cost-effective plumbing system, APEX is your optimal choice! APEX is verv eader to earn vour business and become vour lond-standind blumbind solutions provider

Q1:Can l get a sample?
Yes, we can provide you with free samples.

Q2: Can l use my own logo or design on the products?
Yes, we offer OEM/ODM services; your logo and design can be made on the products.

Q3: Do you have a factory?
Yes, we have a factory in Weifang, Shandong Province. You are welcome to visit our company and factory.We can provide OEM/ODM services to our customers.

Q4: What is your factory's production capacity?
We can produce 5,000 tons per month. You can rest assured when placing your order with us.

Q5:When will the goods be shipped?
In-stock products can be shipped within one week. Customized products will be shipped according to customer requirements. We will inform you of the specific shipping time before confirming the order.