One. How to calculate the area of wood-plastic composite tiles?
The area of wood-grain tiles = length of wood-grain tile * width of wood-grain tile * number of pieces per box.
For example, a box of 10 pieces of wood-look tiles, each measuring 600mm x 150mm, can cover an area of 600 x 150 x 10 = 900,000 mm². This equates to 0.9 square meters. It is important to note that there will be some loss during actual installation. Therefore, when purchasing wood-look tiles, it is advisable to buy a slightly larger quantity to avoid running out during installation.
Two. How to calculate the quantity of wood brick tiles.
To calculate the quantity of wood brick tiles needed, you must first determine the area of the wood brick tiles and then calculate the area of the floor to be covered with wood brick tiles. Finally, divide the floor area by the area of a single wood brick tile.
The method for calculating the floor area is simple: multiply the length by the width of the floor.
For example, if you need to install 30 square meters of flooring, how many boxes of 600x150mm wood-grain tiles are required?
In the previous text, we have already calculated that one box of 10 pieces of 600x150mm wood-effect tiles can cover an area of 0.9 square meters. Therefore, when calculating the number of tiles, we should use the same units. If the calculation results in a decimal, it is generally recommended to round up to the nearest whole number, which would be 34 boxes. Additionally, you should also factor in the construction waste (typically 6-8%).