I.Mosaic tilesHow to clean it if it gets dirty?
1. If this is the initial cleaning, carefully and thoroughly remove all mud, debris, and stubborn dirt from the wall surface using a wall scraper. If this is not the initial cleaning, this step can be skipped, but it is still necessary for removing stubborn dirt. Wear gloves from the beginning.
2. Find a dedicated, lint-free cleaning towel specifically for cleaning doors and windows. Use the damp towel to wipe the mosaic tiles that need to be cleaned.
3. Apply a small amount of cleaning agent to the wire brush.
4. Begin cleaning the pre-wetted mosaic tiles with a wire brush impregnated with cleaning solution. While scrubbing, use a spray bottle to apply water to the tiles, which will create more foam and make cleaning more effective. If the tiles are dry, they will be impossible to clean.
5、After using steel wool, wipe the surface with a dry, lint-free cloth at least 3 times. Pay particular attention to detail and wipe any remaining residue thoroughly.
6. Finally, choose a dry towel and wipe the entire wall surface again to complete the work.
II. How to remove stains from mosaic tiles
1. Wipe with a damp cloth.
The surface can be cleaned thoroughly with water and a highly absorbent cotton cloth. Due to the relatively smooth and flat surface of mosaic, it is easy to keep clean. To clean the mosaic, two buckets are needed: one for cleaning solution and one for clean water. First, dip a damp cloth into the cleaning solution bucket and wipe the mosaic surface in circular motions without wringing it out. Then, dip a sponge into the bucket containing clean water and wipe the mosaic surface to remove any remaining residue. Finally, wipe the surface again with the sponge until it is completely clean.
2、Clean with a cleaning brush
If the surface is a floor, at this stage, you should check if it has a drainage system installed. You can first vacuum the surface, then clean it with a cleaning agent and water. Finally, wipe it dry with a clean, absorbent cloth. Generally, this process is sufficient. If the surface is in a bathroom, you can spray a small amount directly after each shower, which will also be effective.
3、Brightening agent for enhancing color
Additionally, a neutral brightening agent can be applied to maintain the luster of the mosaic tiles.