One, what are the mosaic tile cleaning agents?
1、Alkali remover
Alkali removers are specifically formulated to address the various whitening issues on ceramic tiles and stone surfaces. They are scientifically designed into two types: one for natural whitening and one for whitening caused by improper cleaning. These products can be used to clean ceramic tiles, porcelain, glazed bricks, natural stone, and agglomerated stone surfaces, effectively removing both natural whitening and whitening caused by improper cleaning.
2、Dedicated cleaning agent for joint fillers
Suitable for completely removing grout and thin layers of mortar from mosaic tiles. Cleans thoroughly and quickly, revealing the original color of the cleaned surface; features a surface protection agent that creates a protective layer after cleaning. Ready to use and does not require mixing.
3、High-performance rust remover
This product can be used to remove rust stains from acid-resistant mosaic tiles. Note that the natural stone substrate will automatically change its original appearance due to the corrosion of the material. The rust removal agent works due to the action of inorganic acids. It consists of non-ionic surfactants and preservatives, and does not contain hydrochloric acid. The surfactants included in the product are corresponding biodegradable detergents and comply with the legal standards for surfactants.
4、Degreasing agent
Suitable for cleaning surfaces of tiles, stone, glass, plastic, metal products, etc. Effectively removes paint, adhesives, adhesive paper, tape residue, water-based coatings, asphalt, lipstick marks, and other contaminants from the above surfaces.
What is the best way to clean mosaic tiles?
Mosaic tiles are commonly used in kitchens and bathrooms, and due to the different environments, they may be subject to various stains. The cleaning methods for different types of stains also vary. The following introduces several common stain cleaning methods:
1. Removing oil stains
Paint, oil, and other contaminants can be removed using alkaline cleaning agents or organic solvents.
2、Ink removal
Ink, mold, and mildew stains caused by dirt and mildew can be removed using a diluted bleach solution. Simply apply the bleach solution to the stains and allow it to soak for a few minutes before wiping clean.
3、Rust stain removal
Rust and stains on mosaic tiles can be removed using hydrochloric acid or phosphoric acid solutions. Simply wipe several times.
4. Removing scratches on black metal
If there are black metal scratches on mosaic tiles, you can apply a small amount of cleaning agent, wait for 1-2 minutes, and then wipe with a dry cloth to remove the scratches.
5、Removal of paint and adhesives
If adhesive accidentally drips onto mosaic tiles, it can be removed with banana water. Pure banana water is a colorless, transparent, and volatile liquid with a strong banana odor, slightly soluble in water, and soluble in various organic solvents. It is easily flammable and is primarily used as a solvent and thinner for paints.
6、Removing Spots
First, immerse the substrate in a 20%–40% sodium hydroxide solution for 24 hours, then wipe clean with a cloth. Next, immerse in a 30%–50% hydrochloric acid solution for 30 minutes, then wipe clean with a cloth.