One, can glossy bricks be used in bathrooms?
Matte tiles can be used for bathroom walls and floors, providing excellent slip resistance. Matte tiles also have high abrasion resistance, resulting in a relatively long service life, and offer a good aesthetic appearance.
However, due to the low gloss level of matte bricks, it is best not to use matte bricks in bathrooms with poor lighting or cramped spaces. This is because matte bricks can make the bathroom appear darker and smaller, which can negatively impact the living experience.
Two. How to install matte tiles in the bathroom.
1、Installation of edge banding strips using a cross-layout method
This application method is relatively basic and traditional, and only requires the use of auxiliary materials. This method can improve the accuracy of the angles in the flooring, and also simplify the construction process.
2、Grouting method
When installing glossy tiles in a bathroom, a small gap should be left between each tile. This gap is then filled with cement or grout to create a uniform and aesthetically pleasing finish.
3、Dry-Apply Method
"Eliminating the use of cement mortar for laying tiles, only tile adhesive is required, which significantly increases the construction progress. Furthermore, it saves considerable time. The key advantage is its adhesion performance, which far exceeds that of traditional cement mortar. No pre-wetting of the tiles or the substrate is required, and the tiles can be laid directly without the need for pre-wetting or dampening the base."
Three. When laying matte bricks in bathrooms, what should be paid attention to?
1. First, consider the slope issue. When installing glossy tiles, pay attention to flatness, as the flatness and slope of bathroom glossy tiles will affect the flow of water on the floor.
2. When applying a matte brick to the wall, ensure it is applied fully to protect the bathroom wall from moisture and maintain its cleanliness and aesthetics for a long time.
3、The grout joints for the glossy tiles in the bathroom should not be too small. If the grout joints are too small, it can reduce the lifespan of the glossy tiles. During expansion and contraction, air pockets and lifting may occur.
4. Currently, many workers begin filling the joints immediately after laying bathroom tiles, which is highly inappropriate. Because the glossy tiles have not fully dried, filling the joints prematurely can cause them to loosen, leading to detachment of the glossy tiles and creating a safety hazard in the long run.