One: What should I do if my microcrystalline stone surface has scratches?
1、Toothpaste
If the scratches are only on the surface and do not affect the internal structure of the microcrystalline tile, the repair is simple. Apply white toothpaste to the scratches and then repeatedly wipe with a clean cloth. However, be careful not to use toothpaste containing abrasive agents, as this may cause further scratches.
2、Micro-crystal scratch repair agent
If the micro-cracks are deep, purchase a specialized micro-cracked surface repair agent and apply it directly to the cracks. After two hours, apply a second coat. If the cracks appear to reflect light, the repair is complete. This method not only prevents the cracks from expanding but also prevents dirt from accumulating in the cracks, providing excellent repair for the cracks.
II. How to avoid scratches on microcrystalline stone surfaces
1、Maintain the integrity of the microcrystal surface protective film.
The microcrystal stone products leave the factory with a protective film applied to the brick surface. This film prevents contamination and protects against scratches from sand particles. Therefore, whether dry-hanging or laying, the protective film must remain intact throughout the entire process, until the project is completed and thoroughly cleaned. only then should the protective film be removed.
2、Apply a protective layer over the microcrystalline porcelain tile surface.
If, during construction, the protective film on the microcrystalline stone brick surface is lost due to human error or accidents, a protective layer, such as cardboard or thin wood, should be applied to the brick surface to prevent sand particles from being brought by personnel, thus causing abrasion damage to the surface of the microcrystalline stone material.
3. Promptly clean any stains on the microcrystalline stone tile surface.
For cement contamination stains that have already formed on the microcrystalline tile surface, it is necessary to promptly wipe them clean with a clean cloth dampened with water. Cement should not be allowed to harden, as attempting to remove it later with force can damage and further contaminate the surface.
4、Select a specialized care agent for microcrystalline stone.
When cleaning, if necessary, use a specialized cleaning agent for microcrystalline stone or a neutral cleaning agent for glass. Avoid using acidic or alkaline cleaning agents on microcrystalline stone tiles, and do not use stone mildew removers or other corrosive and dissolving substances.