One: Can a squat toilet be converted into a toilet?
A squat toilet can be converted into a standard toilet. However, it's not necessary to purchase a toilet immediately before the conversion. First, you need to determine the installation location of the toilet. This requires removing the squat toilet to measure the distance between the drain and the wall. once the toilet opening is measured, you can purchase a toilet of the appropriate size. Additionally, you need to level the ground by removing any raised areas.
Two. Method for replacing a squat toilet with a sitting toilet.
1. Close the water valve for the toilet and remove the toilet using a cutting tool or other appropriate method. (Note: For homes with underfloor heating, it is recommended to avoid using cutting tools to minimize potential damage.)
2、When removing squat toilets, what should be paid attention to?
① Close the water inlet valve
Before removing the squat toilet, it is necessary to close the water inlet valve connected to the squat toilet, or to close the main water valve in the room. However, removing the squat toilet is a time-consuming process, so it is better to close the squat toilet's water inlet valve.
② Pay attention to moisture-sensitive corners.
To remove the toilet, you will likely need to level the floor slightly first, as the toilet is integrated with the platform. After removing the toilet, you should check if there is a water storage bend in the drainpipe. If there is, you will also need to remove it, as subsequent toilets come with built-in water storage bends.
3. After removing the toilet, check the functionality of the drainage pipe to ensure it is clear. A simple test involves quickly pouring a full bucket of water down the drain and observing the flow. If there is a blockage, it must be cleared before proceeding.
4. After confirming that the drainage system is clear, extend the drainpipe to provide sufficient space for installing the toilet. once the specific location for the toilet installation is determined, the installation and fixing can proceed.
5. After installing the toilet, lay the tiles. once the floor is completely dry, you can use it.