One, can stone be bonded with glass glue?
Glass glue cannot adhere to stone or rock materials; its chemical composition can corrode the surface of stone or rock materials. The adhesive typically used to bond stone or rock materials is stone-specific adhesive.
Two. What type of material is stone adhesive?
Stone glue, also known as stone glue adhesive, refers to all types of glues used in the process of stone fabrication and application, including repair, reinforcement, composite, bonding, and maintenance. Stone glue falls under the category of fine chemicals. Different types of stone glue have different applications.
1、Stone composite adhesive
Stone composite adhesives are primarily used for bonding and joining various materials such as marble, granite, ceramic, aluminum honeycomb (aluminum sheet), glass, wood, particleboard, plastic, and other similar or dissimilar materials.
2、Stone repair adhesive
Stone repair mortar is primarily used for repairing and reinforcing cracks, holes, pits, fishtail patterns, ant trails, and uneven surfaces on marble and granite surfaces, as well as enhancing their appearance and brightness.
3、Stone bonding adhesive
Primarily used for bonding and repairing natural stone, artificial stone, ceramics, metals, concrete, glass, and other products, such as stone edge bonding, marble or mosaic patterns, irregular stone connections, stone dry hanging, architectural reinforcement, architectural sealing, and bonding of grinding tools and abrasives.
4、Install and apply adhesive bonding agent.
Stone installation adhesive products are primarily used in the stone installation process for dry hanging, sealing, and bonding.
Three. How to use stone adhesive
1、Substrate preparation
Clean the substrate of dust, oil stains, and debris, level the substrate, and maintain a dry substrate.
2、Mixing stone adhesive
Mix the stone adhesive according to the specified ratio and stir thoroughly. Apply the stone adhesive evenly onto the stone substrate using a trowel.
3、Drying and curing
Within 24 hours of application, allow the stone adhesive to air dry naturally. once it has fully cured, even in low-temperature winter conditions, the stone adhesive can be placed in a warmer environment to cure for 1.5-2 hours before proceeding to the next stage. This effectively improves the aging resistance and bonding strength of the stone adhesive, while also increasing the smoothness of the substrate.