I.Flooring tilesShould I apply a back-coating agent?
If the tiles have low water absorption or if the tiles are large in size, it is necessary to apply backer coat during the tile laying process. If the tiles have high water absorption, a backer coat is usually not required. Simply soak the tiles beforehand and proceed with the laying process.
Two. What is the backing adhesive for tiles?
Ceramic back glue is a high-molecular adhesive material suitable for processing the back surfaces of large, thin, and ceramic tiles with low water absorption rates. It effectively improves the tile laying effect and effectively solves common problems such as tile voids and detachment that occur during wet tile laying. It also has a long service life, excellent penetration, and waterproofing properties, making it difficult to detach after tile pasting. It is also a waterproof tile adhesive that can be used once.
Three. important considerations for installing backer board for tiles.
1、Pay attention to the construction environment.
When applying the adhesive, it is crucial to pay attention to the construction environment. After application, it should not be exposed to water, as this will affect its bonding performance. Additionally, the temperature difference on the surface should be kept within the range of 5-35℃ during construction.
2、Pay close attention to material preparation.
When using the material, it is important to pay attention to the mixing process. It is crucial not to add water or other additives during mixing, as this can affect the performance. The mixed material should also be used within a short period, as specified in the instructions. If the material sits for too long, its viscosity will be compromised, making it unusable.
3、Pay attention to applying the adhesive.
When applying adhesive, it is important to pay attention to the application process. For small tiles, it is recommended to first arrange the tiles and then apply the adhesive, which is more convenient and saves time. For larger tiles, a roller can be used to apply the adhesive, followed by separating the tiles to prevent them from sticking together.
4、Pay attention to maintenance.
Finally, after the tile adhesive has been applied, it is essential to maintain it properly. The surface should be protected from stains and damage, as this can affect the bonding performance.