I.Soap dispenserHow should the distance be adjusted?
Automatic soap dispensers utilize infrared technology to receive and transmit signals. They automatically open and close, dispensing soap or foam when a hand is placed in front of them. To adjust the sensing module's sensing distance, first ensure that its DC operating voltage meets the required specifications. Excessive or insufficient voltage can negatively impact module performance. Additionally, the power supply must be properly stabilized and filtered.
During testing, personnel should avoid the sensing area as much as possible. Even if the person is not directly in front of the module, being too close to the module can still trigger output. Additionally, personnel should avoid touching the electronic components during testing, as this can also affect the module's operation.
Two. important considerations for using automatic soap dispenser
1、When the liquid level in the dispensing unit is low, immediately add more hand soap to ensure proper flow.
2. Avoid subjecting the automatic soap dispenser to strong impacts, as this can cause significant damage.
3. If the automatic soap dispenser is not used for an extended period, please turn off the power switch and remove the battery.
4、Please do not tilt the dispenser, as this may cause the soap to leak out.
5、Automatic soap dispensers are suitable for use in bathrooms and kitchens.
6. Do not wash the automatic soap dispenser with water, as this may damage the product.
7. Do not use automatic liquid soap dispensers in direct sunlight, as this may affect the product's functionality.
8. The automatic soap dispenser operates normally within an ambient temperature range of 3°C to 50°C.