One. Steps for removing the waste water tank
Step 1: First, close the water inlet valve. Then, open the drain tank cover and drain the water inside.
Step 2: Use a sponge or dry towel to absorb any remaining water in the sink.
Step 3: Remove the connecting water pipe from the toilet, drain any excess water into the toilet, and then remove the water tank from the wall.
Step 4: When removing the water tank from the wall, a wrench is required, as the water tank is fixed to the wall with screws. If the screws have rusted and cannot be turned, they need to be cut with a hacksaw.
Step 5: After cutting the fixed screws, simply apply gentle pressure to lift and remove the water tank.
II. How to install a new flush tank
Step 1: Check if the new water tank's position is the same as the old one. If there is a significant difference, you will need to move the mounting fixtures on the wall.
Step 2: Mount the new water tank onto the accessories, and connect the drain pipe. After installation, tighten the screws using a screwdriver.
Step 3: Attach one end of the hose to the ball valve, and the other end to the bottom of the water tank. Connect the inlet pipe and apply sealant at the joint to effectively prevent leaks.
Step 4: Finally, open the valve for testing. If any issues arise during use, please address them promptly.