One. How to handle the continuous water flow in the bathroom sink.
First, check the cause of the water flow issue in the sink. Then, repair the problem based on the specific cause.
If the control connection components of the drain basin are loose and cannot be fully closed, replacing them with new ones will resolve the issue. If the drain basin's waterproof seal is compromised, it can be re-sealed or replaced with a new seal.
II. How to choose a bathroom sink drain
1、Assess the overall condition.
The overall appearance of the sink should be smooth and flat, with no burrs or uneven surfaces. This indicates good quality.
2、Inspect the surface
When touching the surface of a sink, high-quality sinks typically have a smooth, fine glaze, while low-quality sinks may have a rough glaze and substrate.
3、Measure the required amount.
- Weigh the weight of the flushing tank. Good flushing tanks are made using high-temperature firing, which can achieve full-ceramic quality. They feel heavy when weighed. In contrast, low-quality flushing tanks feel very light when weighed, indicating potential quality issues.
4、Water Absorption Rate
High-temperature fired toilet bowls tend to have lower water absorption rates, are easy to clean, and do not produce odors. The glazed surface also resists cracking. Conversely, low-quality toilet bowls are difficult to clean, prone to odors, and may develop a yellowing appearance over time.
5、 Trial flushing
"Try testing the flushing effect of the sink. If the flushing is effective and quickly removes stains, this sink is a good choice. However, if the flushing is very weak and cannot remove stains, it is best not to purchase it."