How to open the bucket of waterproof adhesive?
1、First, insert the tip of a small screwdriver into the small hole in the bucket lid.
2. Then, it will peel outwards. Please take necessary safety precautions to avoid injury.
3. Following the above steps, repeat the process of lifting the small voids, ensuring sufficient force is applied to lift them until they are halfway between the edge of the bucket and the lifted surface, making it easier to open.
4. Then, carefully lift the lid, as there is a protective layer inside. Please avoid damaging it for future use.
What is the best way to open a waterproof glue bucket?
1、 Use a screwdriver to pry upwards along the seam beneath the paint bucket lid. After lifting the lid to create an opening, air will enter, making it easier to remove the lid with the screwdriver.
2. When removing the cover, you will find a rubber seal underneath. Please do not damage the seal, as this will render the coating unusable once the container is opened.
How should waterproof adhesive be stored after opening?
1- Sealing
The most basic preservation condition is sealing, and this step must never be overlooked.
2Store in the warehouse.
Store the sealed waterproof adhesive in a warehouse. However, it is important to note that you should not mix the coating in the coating warehouse, as the release of flammable, explosive, or toxic gases could lead to a safety incident.
3- Pay attention to the effective storage period.
To maintain the effectiveness of the waterproof sealant, it is necessary to check its expiration date and conduct relevant tests according to the product's technical standards. Waterproof sealants that do not meet the specified requirements should be disposed of immediately.
4- Store separately.
Sealed waterproofing adhesives should not be stored in areas prone to water exposure and contamination with organic solvents, oils, and other materials. Maintain a clean environment around the storage area. For residential waterproofing projects, unused waterproofing adhesives should be sealed and stored in a separate, empty room. For commercial waterproofing projects, store them in a clean, dry warehouse.
5Store in a cool, dry, and well-ventilated area.
When performing waterproofing, it is important to consider environmental impacts and storage conditions. Waterproofing materials should be stored in a cool, dry place away from heat sources, direct sunlight, and rain. The ideal storage temperature is between 5-25°C.