One, what are the ways to stop the PPR pipe from leaking?
1、Using plugs to seal
Suitable tools can be used to seal water pipes, such as rubber stoppers, wooden plugs (with wrapping material inserted into the pipe and tightened), which are commonly used in small pipes. These stoppers can also be made from porous clay and sealed into the pipe. This method can quickly repair water pipes, but the lifespan of the repaired pipes may be relatively short, and they may leak again after a few years, requiring further repair.
Of course, homeowners can purchase high-quality materials at local stores to use as stoppers, such as stainless steel and copper, which are very durable and can withstand up to 10 kilograms of pressure, making them widely used in residential settings.
2、Welding Method
PPR pipes typically have dedicated end caps, such as PVC or UPVC plastic plugs. We can use welding to seal the pipes, locate the leak, then turn off the water valve to drain the remaining water from the PPR pipe. Next, we can use a saw to cut out the leaking area, and then use sandpaper to smooth the cut edges. Finally, we can use connecting devices to add a section of PPR pipe and weld them together using a hot-melt adhesive.
Due to the excellent flexibility, high strength, and excellent processing properties of PPR pipes, they can also resist deformation at high temperatures. This demonstrates that welding is a convenient connection method. After welding, all pipes and flexible conduits can form a complete and durable system, with minimal risk of leaks.
3、Brick masonry sealing method
If the above methods are not feasible for brick-based sealing, then using bricks to seal large and medium-sized pipes directly is an option. While this method provides good sealing, the entire surface is sealed, making it difficult to remove and reuse, which can hinder future flexibility.
Two. important considerations when using PPR pipes.
1. Inspect the product
once the PPR pipes are delivered to our site, the first step is to inspect the pipe for any damage or defects. If any damage is found, it indicates that the purchased PPR pipes are substandard, which can lead to problems and issues during use.
2、Distinguish between hot and cold water
When installing pipes, ensure that the cold water pipe is installed on the left and the hot water pipe is installed on the right, with a spacing between the two pipes less than 30 mm.
3、Pay attention to the melting method.
If you are performing hot-melt welding on PPR pipes, maintaining the temperature around 250 degrees is recommended. Furthermore, it is crucial to immediately join the two pipes after the hot-melt process. The pipes should be joined in a straight manner, without twisting, to ensure a secure connection.