One. Method for opening a horizontal sliding lock.
A lateral-opening security latch can be considered a lateral-opening security latch structure. The centerline of the latch bolt and the centerline of the latch bar are in a vertical state relative to each other, with the top of the bolt acting as an axis for the bolt. The bolt engages with the latch bar in residential communities.
When starting, similar to a standard lock, locate the keyhole on the side and insert the key, rotating it to unlock the mechanism. The locking pin and key rotate together, and then the return spring retracts. When the locking pin reaches a certain angle, the eccentric pin no longer presses against the locking bar, causing the locking bar to lift upwards due to the spring force. once it reaches a certain height, it stops on the locking pin, opening the lock. However, if the key is turned backward, even with the spring resistance, it may not be able to be removed. This is often referred to as "the lock not cooperating."
Two. What should I do if I cannot open a horizontally mounted lock?
There are several reasons why a deadbolt lock may not open, including:* Rust or poor contact* Attempt multiple timesIf you are unable to determine the cause, you can try the following methods:
1、Use the "lock picking" method. Use a metal strip and a thin metal wire. The metal strip should be folded at a 90-degree angle, similar to the cap of a pen, to engage with the lock hole for rotational force. Simultaneously, move the metal wire back and forth near the keyhole to try and open the lock.
2、Use a fine wire to pick the lock. Use a sturdy, flexible metal wire with a small section bent to approximately a 135-degree angle, resembling a hook, to insert into the lock mechanism and rotate it. This method can be challenging, but experienced individuals may find it effective. Additionally, pins or other small tools can also be used for lock picking.
3. Specialized locksmith method. If multiple attempts to open the lock are unsuccessful, a specialized repair technician or locksmith can be contacted. The cost typically varies depending on the location and may require a longer waiting time.
4、Forcing Entry. If immediate access is required due to an emergency, attempting to forcibly open the door may be necessary. This could involve using two screwdrivers to pry open the lock, applying force to break it, or using a blunt object to break the door. However, this method is not recommended unless absolutely necessary.