One, how to clean a split-type integrated stove
To maintain a clean and tidy kitchen, regular cleaning is an effective maintenance method. A simple approach is to consistently clean up spills and messes as they occur. Additionally, the following cleaning procedures can be applied to split-type integrated cookers:
1、Clean and wash the countertop.
Generally, integrated range hood countertops are relatively easy to clean due to their materials, which include stainless steel and tempered glass. These materials are resistant to dirt and grease, and can be easily cleaned with a damp, soft cloth and dish soap. However, it is important to avoid using sharp steel wool or knives, as this can easily cause scratches and damage the appearance.
2、Cleaning of oil-based coatings
It's important to note that areas particularly prone to getting dirty are the grease filters in integrated kitchen ranges. These filters are installed to prevent foreign objects from entering the internal cavity during cooking. Typically, they are made of easy-to-clean materials, and can be easily wiped clean with a cloth. Alternatively, they can be removed and washed with dish soap, then dried and reinstalled.
3. Cleaning the stove
The range hood and hob are cleaned similarly to other cooking appliances. If the hob is not cleaned regularly, it can easily become clogged, which will eventually lead to smaller flames. Therefore, we can use a toothpick to regularly remove debris and clean the inner and outer rings separately for optimal results.
4、Cabinet Cleaning
Currently, standard configurations for integrated kitchen hoods typically include disinfection cabinets, steam ovens, and ovens, as well as more advanced models with additional features. However, they share a common element: the interior of the cabinet, which includes the inner pot, door, heating plate, and water tank. We recommend avoiding the use of chemical cleaners to prevent damage to the internal environment of the hood. Instead, simply wipe the interior with a cloth and allow it to air dry naturally after opening the door.
5、Clean the oil and smoke exhaust channel.
Due to the ease with which grease and dirt accumulate on the surfaces of split-type exhaust ducts, it is necessary to use appropriate degreasing agents to clean them. When cleaning, first activate the exhaust hood at a low speed, then spray the degreasing agent onto the duct, allowing it to draw in the grease and dirt. The degreasing agent will break down the grease and dirt, which will then flow into the collection box. This can be further enhanced by utilizing the smart cleaning function of split-type integrated hoods, maximizing efficiency. Other components, such as the collection box of integrated hoods, can also be cleaned during limited free time.
Two. important considerations for cleaning split integrated cooktops
1. When cleaning a split kitchen range, it is essential to disconnect the power supply. First, remove the flame covers and clean each burner port to prevent clogging, which would affect combustion and increase the risk of relighting. Ensure all components are thoroughly dried before placing them back in their correct positions.
2. When using a split-type range hood, avoid using hard or sharp objects to clean the surface, such as metal cleaning balls, as this can cause scratches and affect the appearance. Some split-type range hoods feature a one-button automatic internal cleaning function, which provides convenience for users to clean the inner unit.
3. Oil collected in the oil collection box should be emptied promptly. Some split-type integrated cooktops have a feature indicating when the oil collection box is full. It is important to empty the oil collection box promptly according to the indication to prevent odors and avoid oil spills contaminating the floor.
4. After each use of the stove, clean the stove surface thoroughly. Use a clean cloth dampened with a neutral cleaning agent to clean the stove's panel, lid, and interior, preventing excessive grease buildup. Over time, this makes it difficult to clean.
5. During the cleaning process, the cleaning tools should also be carefully selected. Avoid using strong acidic or alkaline cleaning agents to prevent corrosion and damage to equipment, and instead use cotton cloths and brushes for cleaning.