1.Vinyl flooringWill it expand and contract with temperature changes?
Synthetic flooring expands and contracts with temperature changes. Therefore, the ground temperature should be between 10°C and 28°C during installation. This allows interface treatment agents, adhesives, and other materials to perform optimally and keeps the expansion and contraction of the synthetic flooring within a controlled range. Additionally, the cut flooring should be placed for 24 hours to restore its memory, allowing the flooring to adapt to environmental changes and to flatten out any curled sections.
Two. How to deal with expansion and contraction of plastic flooring due to temperature changes.
1. Maintain normal indoor humidity and keep the environment dry.
Although the environment is humid and hot, it is essential to maintain the ground's dryness and cleanliness. When cleaning and maintaining, avoid using dripping mops or alkaline solutions to clean the floor, as this can exacerbate moisture buildup and damage the surface finish.
2. Avoid letting rainwater enter the room, especially during rainy weather.
During rainy weather, the venue should immediately close all doors and windows, and prioritize closing windows facing south or southeast. only open windows in the direction of the prevailing wind to minimize the entry of moisture into the room, and avoid unnecessary damage to the wet floor. When the weather clears, immediately open all doors and windows to accelerate the evaporation of moisture. Also, pay attention: during the day, when the outdoor humidity is at its highest, do not open windows. In the afternoon or evening, when the air is drier, open windows to adjust the indoor humidity.
3. Ensure proper dehumidification and drying.
Activate the dehumidifying function of the air conditioner to reduce the humidity in the room and prevent the plastic flooring from warping due to moisture. The air conditioner should not be directed at the floor. It is advisable to maintain a slightly humid indoor environment. When leaving, also draw the curtains to prevent direct sunlight from hitting the floor and to prevent the wood from fading.
4、Discovered damage immediately repair
once PVC flooring starts to bubble, it should be repaired promptly to prevent further deterioration. Additionally, the raised areas should not be stepped on to avoid causing irreversible damage to the channels.
5、Regularly clean PVC plastic flooring
To better maintain the surfaces, we recommend using a soft broom for cleaning during routine maintenance, or using a damp cloth or duster to remove dust and dirt. For general stains, such as grease, use a diluted neutral cleaning agent, such as British Professional Strong Cleaning Agent, to clean, and then wipe with a dry cloth.