I.Rubber flooringHow to remove stains
1. If there are footprints or dust on the rubber flooring, we recommend using a sponge to apply and wipe the liquid floor wax. After wiping, use a clean, damp cloth to dry the surface.
2. If stubborn stains exist on the rubber flooring, add an appropriate amount of cleaning agent to water, then use a mop or cloth that has been soaked and wrung out to clean the floor. While cleaning agents effectively clean the floor, it is best to avoid using them solely for cleaning to prevent softening and damage to the rubber flooring.
3、Rubber floor oil stain removal method: For localized oil stains, apply the original solution of a water-based degreaser directly onto a cloth and wipe. For large-scale oil stains, dilute the water-based degreaser at a ratio of 1:10 and clean with a floor scrubber equipped with a red abrasive pad at a low speed.
4、Rubber flooring black vinyl floor cleaning method: Use cleaning wax with a high-speed polishing machine and a white polishing pad to polish. For long-lasting black vinyl flooring, a strong black vinyl floor remover can be applied directly to a cloth to clean and polish.
5、Rubber flooring gum removal method: Use a professional, high-strength adhesive remover to wipe off the gum directly onto a towel.
6. Rubber flooring and other types of flooring differ. Rubber flooring is more elastic, so avoid using sharp objects or dragging to clean it, as this can damage the surface.
Two. How to remove paint from rubber flooring
1、Using Alcohol: Dampen a paper towel or cloth with alcohol (ideally industrial-grade alcohol), and wipe the surface. A few swipes should be sufficient to clean it.
2、Using Acetone: Method is the same as above. Use a small amount and ensure thorough cleaning. The best part is that it can quickly and easily remove these residual glues, and is more effective than applying solvent.
3. Using Cleaning Solution: The application method is the same as that for alcohol and acetone. The results are also very good. Cleaning solution does not require specific quality; both good and general-purpose options are acceptable, as long as they effectively remove nail polish.
4. Using Hand Cream: First, remove any imprinted residues from the rubber flooring surface. Then, apply a small amount of hand cream to the surface and gently rub with your thumb. This will help to remove the remaining adhesive. Hand cream is an oily substance, and its properties are incompatible with adhesives. This method utilizes this property to remove the adhesive.
5、Using Banana Oil: This is an industrial-grade solvent specifically designed for removing paint and is readily available. The application method is similar to that of alcohol and acetone.