One、Install the stylish door and curtain track
1. Installation of PVD universal track
First, before installing the PVD universal track, draw a straight line on the beam where the track will be installed. Then, install the track along the drawn line. If the installation is on a concrete wall, expansion screws are required. To install, insert the head of the clip into the track, and then press it down firmly. once it clicks, the clip will be securely fastened.
2. Installation of Aluminum Alloy Rails
Before installing aluminum alloy tracks, it is also necessary to draw a straight horizontal line on the ground. The aluminum alloy tracks should be installed along this line, and screws should be used to fix them to the wall. Pre-drilled holes should be made in the tracks, and then each ring from the curtain should be inserted into the tracks one by one.
II. Installation of Stylish Door Curtains
1. Hang beaded curtain
Install the loop on the curtain rail (the loop is reinforced and should not be forcefully pulled apart; use the side clamping method), and then fix the rail. Different materials at the top require different fixing methods.
2. Install magnetic soft fabric doors.
Open the package and remove the soft door. Insert the magnetic strip into one side of the door curtain, lay it flat so that it is straight, and first secure it with the retaining clip in the middle of the door frame. Install the remaining parts in order, ensuring that all sides are securely attached. After complete installation, test the magnetic strip to ensure it is functioning correctly.
3. Suspended curtain
1. Straighten and separate the wire ropes of the wire rope hoist.2. Attach the wire rope hoist's hooks to the loops of the track.3. Ensure that the ropes are not crossed.
4. Hanging roller blinds
Secure the roll according to the installation guide, wind the roll, place it in the correct position, and fasten with screws.