I.Anti-static floor paintConstruction Steps
1、Ground preparation: Perform grinding, repair, cleaning, and dust removal according to the condition of the ground.
2、Epoxy Anti-Static Floor Primer: Apply a single coat of highly penetrating and strongly adhesive anti-static primer via rolling, to enhance surface adhesion.
3、Installation of Copper Foil: Apply a full layer of conductive copper foil.
4、Anti-static Mortar: Mix the anti-static components with quartz sand and apply evenly with a trowel over multiple layers.
5、Anti-Static Putty: Mix anti-static components with an appropriate amount of putty powder, and evenly apply the mixture using a trowel over multiple layers.
6、Anti-static topcoat: Apply anti-static topcoat by rolling or self-leveling anti-static coating.
7、 Epoxy anti-static flooring application time: based on 250°C, personnel can enter after 24 hours, and the floor can be re-pressed after 72 hours.
II. How to construct an anti-static epoxy floor coating
1. Surface preparation is the first step. Before laying the concrete, the surface must be checked for levelness and absence of loose material. Therefore, appropriate cleaning and leveling operations must be performed, followed by concrete application.
2. Grounding treatment is the next step. We can apply anti-static flooring materials directly onto the concrete substrate to achieve basic anti-static performance. However, in practice, this is not always the case. Some argue that an appropriate insulating material, such as copper sheets, should be placed between the concrete substrate and the surface coating to fully realize the anti-static properties.
3、Application of the Primer for Anti-Static Epoxy Flooring. To ensure better bonding between the substrate and the epoxy flooring, the primer application is essential. In some anti-static flooring systems, the primer is a crucial component, and the floor's resistance is also important.
4、The construction of anti-static flooring requires professional personnel, and the mixing of materials is a crucial step. Additionally, the construction thickness should be determined according to the manufacturer's instructions to ensure that the finished flooring achieves the ideal anti-static effect. We would like to emphasize that tests related to anti-static performance should be conducted by qualified electricians or testing personnel, and strictly according to the specified measurement procedures.
5. After construction, routine maintenance, such as cleaning and wearing ordinary clothing, can lead to the accumulation of static electricity on the floor. Therefore, in environments with strict static electricity requirements, it is necessary to provide detailed instructions on these details, or to comply with the relevant regulations and recommendations provided by the manufacturer, to ensure that the maintenance of the floor maintains its anti-static properties. If there is dirt on the floor, simply reapplying the outer coating will not solve the underlying problem. It is necessary to consult with professional personnel to repair the floor to ensure that its anti-static properties are functioning properly.