One、How to apply adhesive for pure paper wallpaper
1、Slowly add water to the wallpaper adhesive to dilute it.
2、Adjust to the appropriate concentration.
3. After applying the adhesive evenly to the paper-based wallpaper using a brush, fold the wallpaper in an S-shape and let it sit for 10 minutes.
4、When pasting self-adhesive wallpaper, pay attention to ensure proper alignment of the pattern.
5. Use a flat brush to smooth the surface, ensuring that 3-5 cm of space is left at the top of the wall during application, to allow for adjustments.
6. Re-level the surface using a plastic scraper.
7. Use a roller to smooth and compact the joint area.
8. After the adhesive has dried, use a knife to cut away any excess material.
Two. How to apply a base film when using plain wallpaper.
1、Implement basic on-site protection, primarily for the floor and electrical components.
2、Prepare the base film according to the specified mixing ratio with water.
3. Apply the product generously using a roller, and use a brush for fine details and corners. Ensure even and complete coverage of the wall surface substrate.
4. Use a cloth to promptly wipe away the wallpaper substrate that has dripped onto the door frame and baseboards.
5. The application conditions for the base membrane are between 6-40℃. Please avoid applying under conditions where the ambient temperature is below the minimum film-forming temperature of the base membrane (6℃) and relative humidity exceeds 85% in cold, humid weather, as this may cause cracking in the base membrane.