One、How to tear self-adhesive wallpaper cleanly and quickly
1. First, use a utility knife, razor blade, or wallpaper scraper to lift a corner of the self-adhesive wallpaper. Then, gradually peel back this corner to expose a larger area.
2. Next, use a hair dryer to heat the exposed edges of the self-adhesive wallpaper. Set the hair dryer to the highest heat setting to slightly melt the adhesive. While heating, gently peel back the self-adhesive wallpaper.
3. If a hair dryer is not available, hot water can also be used. First, use a gentle touch to create small indentations on the self-adhesive wallpaper. Then, wipe the wall surface to increase its temperature, which will melt the adhesive on the wallpaper, making it easier to peel off.
Two. important considerations when removing wallpaper
1. When removing self-adhesive wallpaper, start by gently peeling it from a corner and work your way across. Avoid ripping it from various locations simultaneously, as this can cause the wallpaper to tear and become small, fragmented pieces that are difficult to remove.
2. When using a hair dryer to apply self-adhesive wallpaper, pay attention to safety. The hot air from the hair dryer can cause burns if not handled properly. Avoid directly exposing your hands to the airflow from the hair dryer, and do not touch the head of the hair dryer with your hands, as this can also cause burns.
3. After the self-adhesive wallpaper heats up, it is necessary to remove it promptly. If the temperature remains high for too long, the self-adhesive wallpaper will cool down, and the adhesive will also solidify, making it more difficult to remove.
4. When removing wallpaper, if a small amount of adhesive remains, it can be wiped clean. Alternatively, apply a warm, damp cloth to the adhesive-covered area until the adhesive softens, and then carefully peel or wipe away the wallpaper.
5. After removing the wallpaper, if there is a lot of adhesive on the wall, you can clean it with salt. Use a white cloth or fabric that can hold salt, place a small amount of salt inside, and gently rub. The adhesive will gradually stick to the fabric. While rubbing, remove the formed adhesive from the cloth.