One, does the application of wall fabric on yarn walls require cutting?
Will the seamless wall fabric tear at the corners? The corners of seamless wall fabric do not need to be cut. The corners need to be cut or not depend on two situations: the quality of the wall fabric is not hard enough, and there is a weft, then it needs to be cut and adjusted on one wall. Even if the product is from a good brand, the corners need to be cut. If the wall fabric is of good quality and there are no other problems, it does not need to be cut.
II. Standard Process for Wallpaper Installation
1、Before applying, inspect the wall surface to ensure it is clean, smooth, and free of any loose or detached areas.
2、Use specialized tools designed for applying wallpaper or other wall coverings, and ideally, a professional imported wallpaper cutter.
3. First, apply the wall base film to the wall surface and mix the seamless wall fabric adhesive according to the specified ratio.
4、After the base film dries, apply wall covering adhesive by rolling from a specific corner of the wall. Typically, the adhesive is applied to one side of the wall (with even distribution up and down) before applying the wall covering.
5. Align the wallpaper with the wall surface, ensuring that the top edge is level with the wall surface and the bottom edge is flush with the baseboard. Use an object to position the entire roll of wallpaper so that it is evenly placed along the baseboard.
6. Unroll the wallpaper and use a scraper to apply the wallpaper to the wall, starting from the inside and working outwards. Ensure that the wallpaper is properly aligned both vertically and horizontally before proceeding with the next section.
7. If the corner is perfectly straight, continue with the rolling and spreading application as described above. If the corner is not straight, make a cut at the corner to create a straight edge.
8. When two people work together, the process will be faster. Measure the length from one corner to the other, leaving a small margin, and then cut the fabric. Two people should then pull the fabric taut from top to bottom and from inside to outside, applying it evenly.
9. Wipe off any excess adhesive with a clean, damp cloth.
10、After applying the material throughout the entire room, conduct a thorough inspection. If bubbles or air pockets are present, they can be easily removed using a household steamer and a flat object.