One、How to install non-woven fabric wallpaper
Non-woven wallpaper, also known as non-woven paper wallpaper, is a relatively high-end type of wallpaper commonly used in everyday life. Proper application of non-woven wallpaper is essential for both aesthetics and functionality.
1、Surface treatment
Regardless of whether you are adhering any wallpaper or wall covering, the wall surface must first be prepared to be smooth and clean. The wall surface should not have any noticeable irregularities or be wet, otherwise the resulting wallpaper appearance will be unsightly. In addition, the wall surface should be treated with a primer or varnish before adhering the wallpaper.
2、Cutting wallpaper
Next, you will need to cut the wallpaper into the appropriate size, which should be determined based on the actual size of the wall.
3、Apply wallpaper adhesive
Place the cut wallpaper aside, and mix the wallpaper adhesive according to the specified ratio. Then, use a dedicated brush to evenly apply the adhesive to the wall surface. Pay attention to the adhesive thickness, which should be approximately 2 mm. Avoid repeatedly applying the adhesive, as the adhesive for non-woven wallpaper is typically quite thick. Even application is the best approach.
4、Wallpaper application
Please apply the cut non-woven fabric wallpaper sheets one by one, following the specified order and placement. Ensure smooth application, avoiding air bubbles or wrinkles. After application, lightly brush the surface with a brush to smooth it out.
Two. important considerations for adhering non-woven wallpaper.
1、When installing non-woven fabric wallpaper, after the base coating on the substrate has dried, draw a vertical line as a standard to ensure the wallpaper is applied correctly.
2. After installing wallpaper, avoid using rigid scrapers or nylon brushes. Instead, use a soft-bristled brush and gently scrape from top to bottom to smooth the non-woven fabric surface and remove bubbles, creases, and avoid scraping out the adhesive from the seams to prevent surface contamination. If adhesive is accidentally squeezed out, immediately wipe it clean with a dry towel. Maintain clean hands during construction.
3、When installing non-woven fabric wallpaper, it is necessary to inspect the work as it progresses. If any issues are found, construction should be immediately stopped, and the cause and solution should be identified before resuming work.