One, how to peel off seamless wallpaper
1、First, use a screwdriver to remove the switch panel and door handle.
2. If the baseboard is pressing the wallpaper underneath, use a utility knife to cut around the baseboard, separating the wallpaper.
3. Use a hot iron to heat and peel off the material simultaneously. The steam from the hot iron melts the adhesive, allowing for quick and clean removal without damaging the wall surface.
4. This method allows for quick removal of seamless wall coverings throughout the entire house, and most importantly, it does not damage the walls, eliminating the need for surface preparation before applying a second coat.
Two. Precautions when removing seamless wall coverings
1、Using a hot-air cutter to remove wall coverings is very practical, but due to tool limitations, you can hire a wall covering specialist to handle the removal.
2. When encountering stubborn adhesion, avoid excessive pulling to prevent damage to the wall.
3、Due to the high steam temperature, it prevents burns.
4. If any remaining scraps of seamless wallpaper are left after removal, they can be cleaned with alcohol. Alcohol is volatile, so there is no need to worry about moisture affecting the wall. However, high-concentration alcohol should not be used, as this will not only make the wallpaper turn black and emit an odor, but will also cause significant damage to the wall.