One. Scraping noise
1、Failure symptoms
When opening and closing the door, the door leaf rubs against the door frame, producing a dull "creaking" sound.
2、Cause of failure
The quality of the wood panels used in the doors is poor, causing the door panels to warp, which in turn results in excessive spacing between the door panel and the door frame.
3. Remediation methods
We need to identify the areas of abrasion, adjust the screws on the spring hinges to maintain the appropriate distance between the door leaf and the door frame (if the distance is too close, the hinge's near end is prone to abrasion; if the distance is too far, the hinge's far end is prone to abrasion). We need to adjust these while opening and closing the door.
Two. Friction noise
1、Failure symptoms
The "creaking" sound when opening doors is usually caused by friction between the internal components of the hinges.
2、Causes of failure
Under normal circumstances, hinges should rotate smoothly and freely. However, if the two surfaces that come into contact during rotation are not perfectly smooth, noise will be generated.
3. Repair methods
Increasing the lubrication of hinges can quickly eliminate squeaking sounds. We can purchase dedicated mechanical lubricants (or use edible oils as an alternative), and apply the oil along the hinge gaps.
III. Rust Noise
1、Failure symptoms
When opening and closing the door, it not only makes unusual noises but also feels stiff and difficult to operate.
2、Cause of the problem
The hinges are rusting, which ultimately points to a quality issue.
3. Repair methods
If the corrosion is minor, applying lubricating oil repeatedly can resolve the issue. While applying the oil, rotate the hinges to remove the rust. If the corrosion is severe, it is necessary to replace the hinges. When selecting hinges, stainless steel hinges or pure copper hinges can reduce the likelihood of rust.
IV. Mechanical Noise
1、Failure Symptoms
The door makes a loud, hollow "creaking" sound when opened.
2、Cause of failure
This is often due to damage within the hinge mechanism.
3、Repair methods
If the hinges of wooden doors are damaged and cannot be repaired, the only solution is to replace them.
Five. Deformation Noise
1、Failure Symptoms
When operating the wooden door, a noticeable and abrupt resistance is felt, along with a distinct "clicking" sound.
2、Reasons for failure
Wooden doors are susceptible to moisture and warping, which can lead to unwanted noises when opening and closing them.
3、Repair methods
Currently, besides replacing the door frame, there are not many other effective solutions.
Six. Loose Noise
1、Failure Symptoms
The door made a "thud" sound after closing.
2、Causes of failure
- One of the main reasons is the loosening of wooden doors. The primary cause of loosening wooden doors is the small size of the door leaf, which creates space for movement within the door frame.
3、Repair methods
There is a sealing strip between the door and the door frame. We can replace it with a thicker sealing strip to help secure the wooden door.