I.WallpaperDo you need to apply a surface treatment agent?
If there are gaps along the edges of the wallpaper, you need to apply joint filler. This joint filler is also known as decorative filler, primarily used to enhance the stability and aesthetics of the wall surface, and can help prevent wallpaper from peeling. Without it, you will see the traces of wallpaper cutting and unsightly gaps. This type of joint filler, specifically designed for edging, does not corrode the wallpaper and is also waterproof, pest-resistant, and easy to clean. Generally, it is not recommended to use silicone sealant for edging, as it can yellow and crack over time.
Two. How to apply wall fabric beautifying glue
1. Fill gaps
The application methods for cosmetic grout and grout are similar. First, the gaps need to be addressed. Before application, the substrate must be thoroughly cleaned, and any excess adhesive or debris within the gaps should be removed to ensure the gaps are free of contaminants.
2、Clean the joints
After filling the gaps, it is necessary to clean the surface of the gaps. However, it is best to avoid using water during cleaning. If water must be used, it should be applied after the gaps have dried.
3、Apply decorative paper
It may seem like applying wallpaper is a simple task with little technical complexity, but achieving a flawless application requires careful attention to detail. Proper alignment during application is crucial to avoid issues later on.
4、Apply putty
Before applying the adhesive, first place the adhesive in the applicator gun. Then, apply the adhesive evenly along the joint. However, it is best to apply a 30-40cm strip of adhesive first.
5、Remove excess adhesive.
This is the final step in the application of wall fabric beautification glue, and it is also the most crucial step.