What is full-body porcelain tile? Is full-body porcelain tile suitable for exterior walls?

Mar 14, 2026 PipesB2B Marketplace
One. What is full-body porcelain tile?Porcelain tiles refer to ceramic-glazed tiles with a water absorption rate of no more than 0.5%. They are made from quartz sand and clay, which are mixed and fired according to a specific ratio. Then, they are polishe

One. What is full-body porcelain tile?

Porcelain tiles refer to ceramic-glazed tiles with a water absorption rate of no more than 0.5%. They are made from quartz sand and clay, which are mixed and fired according to a specific ratio. Then, they are polished and smoothed to achieve a glossy, mirror-like surface.

Two. What are the advantages of porcelain tiles?


Porcelain tiles exhibit vibrant and soft colors with minimal color variations. They possess stable physical and chemical properties, offering excellent corrosion resistance and stain resistance. Vitrified porcelain tiles have a relatively thin thickness, high flexural strength, and lightweight construction, which can reduce the load on buildings. They also have high flexural strength and low water absorption.

Three. Are the exterior wall bricks made of full-body ceramic?

Generally, exterior wall tiles are installed as full-body tiles due to the high water absorption rate of terracotta tiles. If terracotta tiles are installed on exterior walls, they will quickly develop issues such as tile blistering and detachment. However, full-body tiles are more expensive. Some unscrupulous vendors may use terracotta tiles as full-body tiles to increase profits. Therefore, consumers should carefully distinguish between the two when purchasing.

Four. How to determine if it is full-bodied porcelain tile.

1、Inspect

Upon visual inspection, if the cross-section clearly shows two distinct layers, it indicates that the material is not fully porcelain.

2、Listen

Use one hand to hold the edge or corner of the tile, allowing it to hang down easily. With the other hand, strike the center of the tile to produce a resonant, full-bodied sound, indicating that it is a full-bodied vitreous ceramic tile.

3、 Water resistance

Due to the low water absorption rate of full-bodied porcelain tiles, place the tiles upside down and apply water to the back surface. Observe the rate at which the water spreads and saturates the tile. Generally, a slower absorption rate indicates a genuine full-bodied porcelain tile.

Keyword:

Related News

More >