One、What type of screws are suitable for particleboard?
1、If there are through-holes, use machine screws in conjunction with nuts. Machine screws are typically larger and longer, and they need to withstand significant loads.
2. If there are no obvious through holes, but there are small, non-transparent holes, use self-tapping screws to penetrate them. Self-tapping screws are generally small and relatively short, and their load-bearing capacity is relatively low.
3. Screws used for furniture are typically flat-head screws to ensure a smooth appearance. However, machine screws and self-tapping screws are also very common and require separate consideration.
Two. How to securely fasten screws to particleboard.
1、Easily attachable，However, this is not reliable.，Loosely attached。
2. Alternatively, you can drill holes first, then insert the pre-embedment, and finally secure it with screws.
3. Alternatively, you can tighten it and then apply adhesive to fix it.
4. Alternatively, you can use other methods, depending on your specific needs, such as using a three-in-one solution or wood dowel positioning. If fixing, the second method is generally preferred.
III. Screw Installation Tips on Plywood
1. You can apply a small amount of soapy water to the screw threads, which will make it easy to tighten.
2. At the screw locations, first drill or drive a nail to create a pilot hole, then use a nail hammer to drive the screws in to approximately 2/3 of their depth, and finally tighten them with a screwdriver.
3. When tightening screws with a screwdriver, do not apply excessive pressure, as this can damage the opening and prevent further tightening.