One, How to pair and correctly code the automatic door remote controller
An automatic door remote control is a control device that uses radio signals to control automatic doors. It is primarily used by personnel to operate the doors. Before using an automatic door remote control, it must be paired and programmed correctly.
1. How to pair the automatic door remote control.
(1) Before using the new automatic door remote control, you must perform a code initialization. Simultaneously, press the two buttons on the top row. After seeing the indicator light flash continuously, release the buttons, and the code initialization will be successful.
(2) Proceed to match the buttons, placing the new and old remote controls together and simultaneously pressing the same two buttons. once the indicator light flashes, release both buttons. The first button will be successfully matched.
(3) Press the corresponding button without releasing it. The indicator light will remain on, indicating successful matching. If the indicator light flashes and then turns off, it means the matching failed; try matching again.
(4) once all other keys have been properly matched, the device can be used.
2、Automatic door remote control pairing method
There are two methods for programming automatic door remote controls: fixed code and rolling code. Rolling code is generally used in situations where security is a concern.
(1) Advantages of the Rolling Code Encoding Method:- High level of security and automatic code change after each transmission.- Large encoding capacity with more than 100,000 address codes.- Easy to implement: a receiver can learn multiple different transmitters.- Low error rate.
(2) Advantages of the code-based method: Primarily, it is very cost-effective, which leads to widespread application. It is suitable for situations where confidentiality is not a primary concern.
Two. What should I do if the automatic door remote is lost?
The method described above for the automatic remote control relies on having an existing, pre-made remote control. If the original remote control is lost, this method will no longer work. So, how can you re-program an automatic door remote control if the original is missing?
1. To determine the brand of the automatic door, you can contact the distributor or the manufacturer directly, and then purchase a compatible remote control. If a remote control of the same model is not available, an external remote control system can be installed.
2. Open the control box and examine the internal chips. Use a soldering iron to assemble a new automatic door remote control.
3. If the above methods are unsuccessful, the receiver and associated components must be replaced together.