One. How to install dust-proof windows
Step 1: Clean the dustproof window frame thoroughly, then inspect the four corners for any damage. If damage is present, replace it immediately.
Step 2: After cutting the dustproof window to the specifications of the window frame, install it. Use a clamp to firmly press the window frame, tighten the window, and then use a clamp to firmly press both sides of the window frame, and finally press the last side of the window. Leave a suitable amount of extra window material, and then cut it off with scissors.
Note: When pressing, do not apply excessive force. You can use chopsticks or other round wooden sticks to press, or, ideally, use tools with rolling wheels (specialized tools).
II. How to clean and remove dust-proof windows
1、Use a towel or sponge to clean.
For heavily soiled window screens, you can directly clean them with a wet towel or sponge. After squeezing out the excess water, repeatedly wipe the screen to transfer the dirt to the towel. Finally, wash the towel to remove the dirt.
2、Vacuum cleaner, newspaper cleaning
First, wet the newspaper and fix it to the window screen. Then, use a vacuum cleaner to remove dust and other stains from the window screen. This method effectively utilizes old newspapers and provides good results.
3、Remove cigarette stains
First, remove the outer paper from the cigarette. Mix the tobacco, baking soda, and talcum powder with a large amount of water, then shake well to ensure even mixing. Apply the mixture to the window screen, and finally wipe clean with a damp cloth.
4、Clean with flour
After mixing flour with water, it will have a certain viscosity, creating a dough-like consistency. Apply this mixture to the window screen and allow it to solidify. Then, remove the solidified mixture.
5、Clean with a cleaning agent.
Cleaning agents inherently possess cleaning properties. When mixed with water, they can be applied to window coverings using old newspapers. once the newspapers are dry, they can be easily removed.
6、Clean with baking soda.
Baking soda has a weak alkaline property. Dissolve it in warm water, then use a brush to scrub the surface with the resulting solution.