One. Method for using solid wood door repair paste
1、Apply adhesive tape to the left side of the solid wood door where repairs are needed.
2. Apply adhesive tape to the right side of the solid wood door that requires repair.
3. Apply the repair paste in the same color as the solid wood door to the solid wood door.
4. Apply ready-mixed putty paste to all wooden doors that require repair.
5. Use a scraper to smooth the edges of the repaired area.
6. Spread the repair paste evenly.
7. Remove the adhesive tape from the right side.
8. Remove the adhesive tape from the left side.
9. This completes the repair of the solid wood door.
Two. Usage precautions for wood door repair paste
1、The wood door repair paste should be added in small amounts and repeatedly to allow for easier control of color changes.
2、For wooden doors with a pattern, after applying repair paste, use a trim board to smooth the paste, and then use a brush to paint the pattern.
3. Before repairing solid wood doors, it is necessary to uniformly fill the damaged areas of the solid wood door. After the putty powder is completely dry, sand it smooth and then apply the repair paste.