One. What should I do if the sensor key for the building doors is malfunctioning?
The induction key used in the building door access system can be programmed if it is an ID chip; however, it cannot be programmed if it is an IC chip. The specific programmability needs to be confirmed with the manufacturer. The induction door lock system is based on RFID technology, which is a non-contact automatic identification technology that enables two-way communication without physical contact, achieving recognition and data exchange without manual intervention and simple operation.
Two. Can the key for the building door's sensor be reprogrammed if it's malfunctioning?
It can be mixed, but you need to obtain the necessary materials and instructions from the property management office or community administrator.
The access card for the building doors contains an RFID chip. When an RFID card is presented to a card reader, the electromagnetic waves emitted by the reader begin to read the information on the card. This information can not only be read but also written to and modified, making the chip card more than just a key; it also functions as an electronic ID.
By reading the information from the card using a card reader and then inputting the information into a new card, the new card can obtain all the information from the original card and can be used just like the original card.
Three. Can the magnetic door lock card be reprogrammed?
1、 By using the key to manually hold the lock in the open position, the door lock information can be cleared. once the electronic clearing sound is heard, the authorized card can be swiped.
2. Some door locks come with a reset card (also known as an initialization card) that can be used to clear the door lock's information. Simply wipe the card over the lock and follow the on-screen prompts to complete the reset.
3. Some electromagnetic door locks have a reset button on the back of the control board, which can be pressed to reset the lock. However, this type of electromagnetic door lock is relatively uncommon, so these two methods are typically used more often.