One, how to clean the oil stains on the rolling shutter door.
1、If the stains are simply from grease, a small amount of dish soap is sufficient. Simply apply the soap to a cloth and wipe the surface clean.
2. For stubborn grease stains, you can use potato peels to clean them. Place the cleaning agent on the potato peels and scrub, then rinse with clean water.
3. Mix white vinegar with water and then clean the roller shutter door. This method can effectively remove stains.
4. Prepare a packet of common table salt (baking soda). Dissolve it in warm water and stir until completely dissolved. Then, use a steel wool pad to gently wipe the surface. Be careful not to apply too much pressure, as this could scratch the roller door.
5. If you are concerned about scratching the rolling door with steel wool, you can also clean the oil stains on the rolling door by using a soft-bristled brush and toothpaste.
Two. Clever tips for cleaning rolling doors
1. Clean the interior walls and accessories of the rolling door with a mild cleaning agent, then wipe them dry with a soft cloth.
2. Use a soft, clean cloth to clean the exterior of the roller shutter door. Lightly mist the cloth with water, rather than directly spraying water onto the surface of the roller shutter door, to ensure even moisture distribution. The roller shutter door handles should be cleaned with a mild cleaning agent and then wiped dry with a soft cloth.
3. Vacuum clean the roller door at least once or twice per year using a vacuum cleaner.
4. If the rubber seals on the rolling door are very dirty and covered with debris, it may prevent the door from closing properly. We can clean the seals with a mild cleaning agent and a damp cloth, then dry them with a clean, soft cloth. We can also use a small piece of cloth wrapped around a stick or chopsticks to remove debris from the grooves and openings.