One. How to set up a fingerprint lock on a glass door.
1. First, open the sliding cover of the smart fingerprint door lock and activate the password input area.
2. Then, press the "Enter" and "OK" keys in the lower-left corner to enter the management mode. Most of the settings for the door lock are configured within this management mode.
3. After entering administrator mode, you will be prompted to enter the administrator password. The initial password is 123456.
4、After entering the password, we see four options, and select option "2" to set the inner door.
5、After entering the user interface settings, you will see three options. Select the number "1" to add a user.
6. After entering the user addition interface, we see three options: adding a password, fingerprint, and magnetic card. Selecting "2" adds a fingerprint.
7. After entering the fingerprint identification, allow 30 seconds for the fingerprint to be captured, then place the required fingerprint in the fingerprint area. Finally, a "Settings successful" message will be displayed.
Two. How to initialize the fingerprint glass door lock.
1、Hold down the initialization key with your hand and do not release it. Then, disconnect the power.
2. After disconnecting the power, hold the power switch down while reconnecting the power supply.
3. Then, on the other half of the smart lock, open the display. If it displays "Initializing," you can release your hand and wait until the initialization is complete.