One. Where to strike the hanging lock with a hammer?
Before attempting to pick the lock, it's essential to understand the internal structure of the lock. once you've identified the connection points between the lock body and the locking mechanism, you can proceed with prying it open. First, locate the connection points between the lock body and the locking mechanism. This is typically the area you'll target when attempting to open the lock, usually on the right side of the lock's face. Then, using a hammer, strike the connection point from the side. This should make it easier to break the lock.
Two. How to easily break open a lock?
Step 1: First, use your left index finger to firmly press and tighten the lock's center mechanism.
Step 2: While holding the middle part of the lock with your index finger, use your thumb and ring finger to apply pressure to the lock body.
Step 3: Then, use a hammer to repeatedly strike the lock mechanism, applying consistent force to the sides of the lock. During this process, ensure that the fingers (index, thumb, and ring finger) are properly positioned and secured according to the hand gestures described above.
Fourth Step: Continue applying force to the lock edge for about 10 minutes. This will loosen the lock. Continue applying force for another 5 minutes, and you will notice that the lock has automatically popped up a short distance.
Step 5: Pull the shackle upwards with force. When the shackle has rotated 90 degrees, the padlock is completely disengaged, and the operation is complete.
Please note: When using a hammer to open a lock, always prioritize personal safety and avoid hitting yourself. If you are unable to open the lock, we recommend contacting a locksmith.