One, what does "hotel lock room" mean?
"Hotel room lockout" refers to the situation where a hotel room door is locked after check-in. After checking into a hotel room, it is common practice to lock the door for security purposes.
Another way to "lock" a room in a hotel is to indicate that it is already occupied. This is a categorization of the room's occupancy status by the hotel's system. These categories typically include: guest occupancy, maintenance occupancy, and reservation occupancy, all of which fall under "locking" a room.
II. Steps for installing hotel door locks
Step 1: Software
Software License: Place the software license card on the reader, locate the license section within the software, and click to activate.
Change Password: Add operator and assign different permissions.
Configure hotel layout: Add hotel floors - zones - areas - floors.
Add room type: Add room number (Room number must correspond to the correct building, district, area, and floor)
Step 2: Setting the parameters
Room Setting Card: One card per room, with the corresponding room number clearly marked.
Time card: Time cards must be freshly prepared and used immediately. If they are used more than 1 hour after preparation, they must be re-prepared.
Initialization Card: Also known as a "clear card," used to remove door lock authorization information.
Step 3: Configure door lock information
Check: Ensure the door lock is properly installed and that the batteries are correctly inserted.
Set door lock information: Swipe the door lock authorization card - room setting card (swipe the corresponding room number) and time card. If all lights are illuminated normally, it indicates success.
Test: If you can open the door by swiping the corresponding guest card, then it works.