One、How to change the password for a lockable anti-theft door.
Generally, there are three ways to change the password on an electronic keypad door lock. The first method involves resetting the lock from the inside by pressing a specific button for a certain number of seconds and then re-entering the password. The second method applies to locks controlled by a central system, where the password can be modified from the computer of the central control unit. The third method involves using the mechanical key provided with the lock to set the initial password. Now, let's detail the first method of changing the password:
1. Press the power button on the bottom of the external panel three times, and then press the "*" button three times. A long beep will sound.
2. Enter the old password and press the '#' key to confirm. The alarm will sound and the LED light will flash.
3. Enter a new password with 6-12 characters and press the '#' key to confirm. A long beep will sound.
4. Enter the same new password again and press the '#' key to confirm.
important Notes: During the setup process, if an error occurs, the system will exit the setup program. If the input is correct, the buzzer will sound for a long duration (or play a musical tone) to indicate success, and the LED will turn off.
Two. How to set the password and fingerprint for the biometric lock.
1. First, we open the sliding mechanism of the smart fingerprint door lock and activate the password input area.
2. Then, press the "Enter" and "OK" keys in the lower-left corner to enter administrator mode. This is where most settings for the door locks are configured.
3. After entering administrator mode, you will be prompted to enter the administrator password. The initial password is 123456.
4、After entering the password, we see four options. Select option "2" to set up user accounts.
5. After entering the user interface settings, we can see three options, and we select option "1" to add a user.
6. After entering the user addition interface, we see three options: adding a password, fingerprint, and magnetic card. Today, we will introduce how to add a fingerprint, so select the number "2" to add a fingerprint.
7. After entering the fingerprint recognition mode, you have 30 seconds to register the fingerprint. Simply place the fingerprint you want to register in the fingerprint area, and you will be prompted with "Registration successful."
8. Finally, let's put it to the test: open the door and see if it works.