One、Reasons for Electronic Lock Password Failure and Solutions
1. When the fingerprint lock fails to function, it may be due to a depleted battery. Replacing the battery will resolve the issue.
2. Repeated incorrect entry of fingerprints or passwords will also cause the fingerprint password lock to become disabled. This disabling is actually the automatic locking of the internal system of the fingerprint password lock, which typically takes a few minutes to recover. This is to prevent unauthorized access to the password.
3. Different brands of fingerprint lock systems have different locking times. You can call the after-sales service phone number of the fingerprint lock brand or consult the instruction manual.
4. Some brands' fingerprint locks typically have a system locking time of around 1 minute, after which the system automatically unlocks. If you cannot wait, you can use a spare key to unlock the door and then reset the system.
5. Fingerprint lock failure may also be due to a problem with the lock's internal circuitry. If you are unsure, you can contact the vendor to resolve this issue.
6. In extreme weather conditions, the fingerprint may not be recognized. Try taking a deep breath and then attempting to unlock the device.
7、The fingerprints of elderly and young people are not deep, making recognition difficult. It is recommended to set up more fingers. If the fingerprints are damaged and the peeling detection function is not working, it may be due to this.
Two. How to unlock an electronic password lock when the password has been invalidated.
1. An emergency key can be used to unlock the door. The emergency power box has a small hole located directly below the panel's top. Open the emergency lock cover on the panel, insert the emergency lock key, and turn it clockwise to unlock the electronic lock. Then, open the door lock normally. Use the reset button inside the box to reset the password or directly change the password.
2. Currently, most household anti-theft door locks have fingerprint recognition, allowing access with either a fingerprint or a key. If the lock does not have a key or fingerprint function, you can seek out someone who knows the password or a family member who has a key.
3. If the above methods are unsuccessful, contact a reputable locksmith company that is registered with the police or contact the original manufacturer for assistance.