I.Anti-theft door lock cylinderHow are panels installed?
Step 1: First, secure the screws and insert them into the holes of the mounting plate, then insert them from the locking hole on the door side into the door.
Step 2: Next, insert the hexagonal screws through the mounting holes, and use a hand wrench to secure the door hinges. Then, tighten the hexagonal screws further.
Third Part: Repeat the above steps until all four hexagonal screws are securely fastened. Do not overtighten for subsequent installation.
Step 4: Adjust the anti-theft cover to the correct position and fix it with four hexagonal screws. This completes the installation of the anti-theft cover, and the anti-theft door lock is also finished. Check that the lock hole is functioning smoothly.
Two. Installation method for anti-theft door lock panel
The locking surface of anti-theft door locks typically employs the most advanced cast steel integrated structure, with no internal manual rivets or plastic components. Special processes ensure the lock's robust durability, high resistance to damage, and suitability for use in residential and public buildings for anti-theft purposes. The locking mechanism and installation of the anti-theft door lock are crucial.
1. First, according to the installation dimensions specified for the anti-theft door lock, drill and create the lock installation holes on the anti-theft door.
2. Subsequently, sequentially insert the locking body of the anti-theft door into the corresponding hole, secure with screws, and install screws and connecting screws on the outer panel. Insert the connecting rod into the rod hole of the locking body, aligning the hand-operated hole of the outer panel with the rod hole, and then install the outer panel.
3. Next, install the inner panel components and tighten the fasteners. Insert the lock body from the inside into the lock body lock hole and tighten the screws after inserting them into the mounting holes of the lock body. Install the lock box or lock plate on the door frame.