One, can glass doors be fitted with locks?
Glass doors can be fitted with locks. Glass door locks are types of locks that are installed on glass doors, with common types including handle locks, keyhole locks, and ground locks. The specifications of these locks may vary depending on the manufacturer. Glass doors can also be fitted with fully automatic fingerprint locks, which are more convenient. These locks feature automatic closing and locking, as well as functions for fingerprints, passwords, cards, and doorbells.
Two. How to install door locks for glass doors.
1. Prepare materials and tools
Ensure all glass doors are securely locked and that products are individually removed and sorted. Typical door control systems include door latches, electric locks, door control controllers, and door control switches, among other components. After removing the products, inspect them for any signs of deformation or damage. Also, prepare the necessary tools for installation, such as screwdrivers, cutting tools, and marking pens.
2、Install electrical locking devices
Please remove the installation positioning paper for the electric latch, and place it above the door frame. Use a marker to mark the hole positions for the electric latch. Then, use a cutting machine to mark and cut the door frame. Next, use a drill to drill holes in the wall of the door frame, inserting the door lock wires into the holes until they reach the electric latch installation position on the door frame. Then, mark the screw holes for the electric latch using the positioning paper and drill holes. Finally, remove a portion of the wire insulation using scissors or similar tools. Connect the wires to the corresponding interface of the electric latch, and then secure the electric latch to the door frame using screws.
3、Install door hinges
We will place the door seal above the glass door, and then attach the door closer to the door frame. The metal piece on the door closer should align with the locking pin of the electric strike. After aligning the door closer with the electric strike, we will use a screwdriver to tighten the fixing screws on the door closer, securing it in place.
4、Install access control systemtool
Please remove the base of the access control controller and place it on the wall, marking the location of the screw holes. Then, use a drill to drill holes in the wall. Next, place the base on the wall and secure it with screws, using a screwdriver to tighten the screws. Use a drill to drill holes in the center of the base on the wall, run the control unit cables through, connect the cables to the control unit, and secure the control unit to the base with screws.
5、Install access control switches
Mark the location for the switch box mounting on the wall surface. After drilling the holes using a power drill, fix the switch box to the wall using screws. Connect the door access wiring to the switch box, then cover the switch panel. Next, open the door access power enclosure and connect the wiring from the glass door lock to the corresponding terminals on the power supply. Then, insert the power supply into the ceiling/false ceiling. The door access wiring on the wall can be secured using cable channels.