1. How to remove the lock on a glass door.
1、Glass door handle removal method
First, loosen and remove the screws for the locking mechanism on the panel. Then, loosen and remove the remaining 2 screws on the panel, and the panel can be removed. Finally, loosen and remove the screws on the door side lock mechanism, and the disassembly is complete.
2、Procedure for removing the spherical lock from the glass door.
To remove the lock:1. Locate the lock mechanism from the inside. There is a small hole on the handle. Use a stiff, pointed object (such as a nail) to push into the hole and apply pressure while pulling the handle towards you.2. Remove the circular disc that is stuck to the door. Turn it counterclockwise to reveal two screws. Use a Phillips head screwdriver to remove the screws. You can then pull the lock mechanism out from the inside.
II. Installation method for glass door locks
1. Install magnetic locks on the frameless glass door using U-shaped brackets.
Glass doors without frames require accessories to aid installation. The installation method is similar to that of ordinary doors, but differs in the third step when installing the latch plate. The U-shaped groove, along with the rubber buffer and stainless steel gasket (placed on one side of the lock screw), is fitted onto the glass door, and then secured to the glass door using headless Allen screws. Finally, the latch plate is fixed to the U-shaped groove. This method is suitable for glass doors of different thicknesses and different types of electromagnetic locks.
2、Fixation
1. Use an AB frame to install. First, fix the AB frame to the glass door using glass-specific adhesive (or double-sided tape). Then, fix the relay plate to the frame. Finally, install the glass door lock.