One, how much does it cost to repair a burglar-proof door lock?
Can the locking mechanism of a burglar-proof door be repaired? Generally, the locking mechanism of a burglar-proof door cannot be repaired; it usually needs to be replaced. The cost of repairing a burglar-proof door locking mechanism depends on the price of replacing the entire locking mechanism.
The anti-theft lock utilizes multiple anti-theft technologies, including various non-standard anti-extraction pins, to prevent technical unlocking. Combined with a unique pin and blade structure design, it possesses a high level of security against technical unlocking. The lock core contains precision numbered pins and non-standard pin structures that automatically lock when both the numbered pin and the non-standard pin must be simultaneously extracted, thereby preventing technical unlocking. The lock core utilizes multiple non-standard pins in a combination, capable of generating up to billions of unique key combinations, enabling zero-key compatibility within a specific area (one in six million). The lock core also incorporates side-pressing edge pins, significantly enhancing its resistance to forced entry.
Two. If the anti-theft door lock is broken, how can you open the door?
1. After selecting the lock, loosen the two screws located on either side of the handle panel. These screws are primarily used for securing the panel. You can easily complete this step with a standard cross-head screwdriver.
2. After tightening the screws, place the screws back in their original positions and tighten the screws on both sides of the housing. However, be careful not to overtighten these screws during installation, as this could make it difficult to open the door. First, remove the handle, and then remove the handle cap.
3. Remove the anti-theft door lock and place the pins and screws back in their original positions, ensuring you remember the disassembly steps. Return everything to its original state. Do not lose any parts.
4. Unscrew the screws securing the fixed lock, remove the lock, and if you cannot manually pull out the lock after removing the screws, use a hammer to tap the lock head from the left or right, and then try again.