Step 1: Verify that all components are present.
A complete electric adjustable table should include a tabletop, crossbeam, longitudinal beam, connecting rods, table leg, electric lifting table legs, control box, handheld controller, connecting cable, power cable, and hardware accessories. Upon receiving the goods, we need to check each component to ensure that all parts are present. If any parts are missing or damaged, we need to promptly contact the vendor for replacement.
Step 2: Assemble the table frame
After the electric table legs and crossbeams are separately fixed to the table frame, and the two table leg components are assembled, the table frame is essentially complete. Next, insert the crossbeams into the "connecting rods" to prepare for fixing the table frame to the nail holes pre-drilled on the back of the table top.
Step 3: Secure the table frame.
First, fix the control box securely, then fix the side horizontal and vertical beams (use "Several"Character key to fix the horizontal beams), and finally tighten the 8 screws. Then, connect the motor cables of both side lifting tables to the control box, fix the hand control panel, and plug in the cables. Note that the connecting line of the control box should be plugged in with an L-shaped head.
Step 4: Install the control panel.
After placing the desk upright, the control panel is located on the right side of the desk. An installation video guide has been pre-attached, which can be viewed by scanning a QR code to understand how to activate (initialize). After initialization, the control panel can be used normally. To complete initialization, press any key to activate the power panel, then simultaneously press and hold the up and down arrow buttons for 3 seconds. After initialization, you can adjust the desired height. This completes the installation of the children's learning desk.