One, Installation steps for children's learning table
1、Install the learning table legs.
First, insert the wood dowel into the pre-drilled holes in the table legs, then install the three-in-one screw (with 3 screws) to connect the two sides of the table legs. Note that when installing, the exposed end of the screw should face backward.
2、Install lifting platforms
Attach the lifting board to the interior of the side table legs using screws (typically 6 screws are installed from bottom to top).
3、Install the bookcase
First, install the three sides of the bookcase, leaving space for the bookcase base. Then, attach the bookcase to the back and install it indirectly with the table legs, securing each side with four screws. Finally, install the panels.
4、Bookcase Installation
First, fix the two side panels of the bookshelf to the tabletop. Then, install the remaining large panel behind the bookshelf. The bookshelf consists of four identical side panels. once the two smaller panels are fixed, the bookshelf installation is complete.
II. Installation Points for Children's Learning Table
1、Since the children's learning desk is installed using self-tapping screws, it is necessary to first determine the correct position and then use a screwdriver to press the screws, creating an indentation.
2. Drill holes at the marked locations, using a small drill bit. Insert adhesive plugs.
3、Drill the holes according to the specified location and tighten the screws using a screwdriver. The installation is complete.