I. Installation Points for Children's Study Table
1、Since this is installed using self-tapping screws, first mark the desired location and then use a screw driver to create an indentation (or mark with a marker).
2. Drill holes at the marked locations, using a small drill bit. Then, insert adhesive plugs.
3、 Drill the holes accurately and align them with the corresponding positions. Tighten the screws with a screwdriver, and the installation is complete. Due to the limited number of components and distinct features of the children's learning chair, the installation is very simple.
Two. How to assemble the student desk.
1. Install the table legs. First, insert the wooden dowel into the pre-drilled holes of the table legs. Then, install the three-in-one screw, which consists of three screws to connect the two sides of the table legs. When installing, ensure that the exposed end of the screw faces backward.
2. Install the lifting board, securing it to the internal sides of the table legs using screws. Typically, 6 screws are installed from the bottom up.
3. Install the bookcase: First, install the three sides of the bookcase, leaving the back open for inserting the bookcase base. Then, nail the back of the bookcase, and indirectly install the bookcase by attaching it to the table legs. Secure each side with four screws, and finally, install the panels.
4. Install the shelves: First, fix the two side panels of the shelf to the table top. Then, install the remaining shelf panel. The shelf consists of four identical side panels. once the two smaller panels are fixed, the shelf installation is complete.