One、Child safety seat dismantling method
Step 1: Open the locking mechanism and loosen the five-point safety belt of the child car seat.
Step 2: Open the chair back zipper, press the headrest adjustment switch, move the axis to the slot, move the axis to the slot, detach the shoulder straps and release the seatbelt.
Step 3: Carefully remove the protective sleeve along the cup holder, use the small tool to hook out the metal tab securing the clip, and the safety clip can be removed.
Step 4: Open the bottom of the seat and insert the metal piece into the hole. once the entire seat is removed, you can easily lift the child car seat.
Two. What should I do if the car seat cannot be removed?
1、The child car seat cannot be removed. First, consider whether the brand and quality of the child car seat are not good. There are many counterfeit and substandard products on the market. If you purchase counterfeit or substandard products, they are often difficult to remove after installation.
2. If the issue is not due to product quality, it may be caused by incorrect installation or removal. In this case, parents should first loosen the five-point safety harness of the child car seat. Then, remove the shoulder pads and adjust the seat to the highest position, as well as remove the seat back and shoulder straps. Next, remove the safety straps, unwrap the seat cover, and neatly place the straps in the seat's lower compartment, securing the hidden buckles. Finally, raise the seat to the most inclined angle, grasp the U-shaped metal piece from the bottom and rotate it to be vertical, then pull the piece upwards to remove it, detach the clips, and the car seat can be removed.